Rugged 5500 lb. capacity. Spring-A-Matic handle self returns. Safety designed loop handle includes neutral position and fingertip release. Three position hand lowering control. One piece formed steel "C" channel tapered, reinforced forks. Leak-proof pump. Hard chrome plated ram and piston- Tapered fork ends and pallet entry rollers. Polyurethane wheels and rollers for a quiet and smooth use. Model #HEZ27x48EZVS/W is our steel wheel pallet jack. This unit has steel steer and load wheels. FOB Shipping Point.
200° turning radius allows room to maneuver in tight quarters.
Tough 6,000 lb. lifting capacity.
Solid steel push rods never need adjustment. One piece cast pump features high quality seals, hardened and chrome-plated ram and piston, top-of-stroke and overload safety bypass valves. FOB Shipping Point.
The affordable way for one person to move heavy pallet loads without a fork truck.
User friendly and low maintenance.
Proven ergonomic design has been tested for providing years of reliable usage. Ergonomic design requires only 75 lbs. of pulling force when fully loaded. Spring loaded loop handle automatically returns to vertical position when not in use. Chrome-plated hydraulic pump piston for long seal life. Sloped and rounded fork nose design. 8" nylon steering wheels. 3 position lever - raise, neutral and lower. Hydraulic pump includes overload relief valve. Pump bypasses at full height. User friendly entry and exit rollers. Yellow powder coat finish. FOB Shipping Point.
Fingertip lever control for selecting raise, neutral or lower positions.
Height range is 2 7/8" lowered to 7 3/4" raised.
Finally, an economical way for one person to move heavy pallet loads without the use of a fork truck! Proven design has been tested for providing years of reliable service. Includes two articulating steering wheels and two front load rollers. Steering wheels include bearing dust-covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. Reinforced triple-formed steel forks provide twice the strength ...
An economical way to move heavy pallet loads without the use of a fork truck.
Includes 2 articulating steering wheels and 2 front load rollers.
Steering wheels include precision bearing and dust covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. 2 entry wheel facilitate easy entry and 2 exit rollers make disengagement much smoother. Reinforced triple formed forks. Internally mounted solid steel adjustable push rods. Spring loaded loop handle automatically returns to vertical position when not in use. Hydraulic pump design facilitates easy-access seal replacement. Chrome plated hydraulic pump piston for long seal life. 5500 lb. cap. for standard ...
Features 1 7/8" lowered height for extra low profile skids or pallets. Fingertip lever switch for raise, lower and neutral operation. Rubber cushioned handle grip. Powder coat red finish. Lowered height measures 1 1/2". FOB Shipping Point.
Safely and easily lift and move pallets. Overload bypass, reinforced forks, rubber-coated handle measures 47" in height. 101° steering and can enter pallet from all four sides. Adjustable fork connecting rods, steel 1.7" load wheels and 6" polyurethane steering wheels. Lowered/raised fork height measures 1 3/4"/6". FOB Shipping Point.
Digital scale allows weighing of load on the spot for maximum efficiency.
Uses heavy-duty steel construction for maximum strength and durability.
User friendly and suitable for low height lifting. Built-in scale allows weighing of load while it is being handled. Scale is selectable in a variety of increments to adjust to the size of your load. Keyboard calibration and functional setup with automatic zero capabilities. Digital filtering is used to help compensate for vibration and motion for smoothness and accuracy. Each fork is 7" in width. Scale factory calibrated for shipping destination. Includes a rechargeable battery pack, charger and charger cord. FOB Shipping Point.
Adjustable fork width from 21" to 27" or anywhere in between.
Just loosen and reset front and rear adjusting bolts.
One truck does the work of two. Handles loads up to 5500 lbs. Features 3"W. polyurethane load wheels. Adjustable fork connecting rods. Overload bypass valve. Rubber coated handle. Entry and exit rollers. 7.5" raised height. 3" lowered height. 3" load wheels and 8" steering wheels - both moldon polyurethane. FOB Shipping Point.
Large wheels allow for movement over most surfaces.
Use at construction sites, gravel pits or nurseries - where uneven or rough surfaces exist. Lightweight, yet strong tubular frame design handles evenly distributed loads up to 2,000 lbs. (2,000 lbs. at 12" horizontal load center, 1500 lbs. at 15" horizontal load center). Features large 16" front pneumatic tires and 10" pneumatic steering wheels. Pneumatic tires have sealed bearings for outside durability. Individual forks are 4" W. x 2" H. Easy to operate with 3 position handle, UP, DOWN AND NETURAL. Inside straddle is 50" - outside straddle is 64". Optional Tow Bar allows truck to be towed by an ATV or small utility tractor. FOB Shipping Point.
Ideal for use in food, chemical or pharmaceutical plants where trucks are required to be washed and sanitary. Available in stainless steel or galvanized design. Stainless steel truck will not rust or corrode and features stainless steel parts. Galvanized model is used where wash down is less frequent or sanitary conditions are not required. These trucks have proven reliability and feature large steer wheels with "ball-thrust steering, high tensile steel frame and seamless forks. Hard chrome-plated ram and piston. Full adjustable push rods on forks. 230° pivot action makes maneuvering in compact areas easy. Spring-A-Matic handle self returns to vertical position. Only 1 snap ...
Ideal for sanitary, pharmaceutical, medical, food and wet environments.
Durable 5500 lb. capacity.
Choose either 304 stainless steel frame and forks or entirely 304 stainless steel pallet truck for long life in even the most harsh environments. Fork size: 27" W. x 48" L. Service range is 2 7/8" to 7 3/4". FOB Shipping Point.